Stainless Steel Metric Spherical Rod End Ball Joints

Product Detail

Joint bearing is widely used in all kinds of engineering machinery, hydraulic and electric engineering and other facilities with steering mechanisms. Joint bearing can bear a large load, and it is a kind of connection-controlled bearing, which can rotate and swing and is easily used for various connecting rod motions. According to different types and structures, the bearing can bear a radial load, axial load, or both radial and axial load. It has the features such as big load capacity and impact resistance, corrosion resistance, wear resistance, self-aligning and good lubrication.

CTM:(race:Teflon)   (E.g:CTM2,CTML2)

MTML-16	1-14-LH	1.000	1 .875	1.000	1.375	2 .750	1. 000	4 .125	2. 125	50	30000	N/A
MTM-16	1-14	1 .000	1. 875	1. 000	1.375	2.750	1. 000	4. 125	2.125	50	30000	N/A
MTM 12-10	3/4-16	.626	1. 312	.687	.875	1 .755	.750	2.875	1 .750	50	12000	150
MTM-12-1	3/4-16	.757 .760	1.312	.687	.875	1 .755	.750	2.875	1.750	44	12000	150
MTML-12	3/4-16-LH	.751	1.312	.687	.875	1.755	.750	2.875	1.750	46	12000	150
MTM-12	3/4-16	751	1.312	.687	875	1 755	.750	.2875	1. 750	46	12000	150
MTML-10	5/8-18-LH	.626	1. 125	.562	.750	1. 510	.625	2.625	1. 625	50	8300	100
MTM-10	5/8-18	.626	1.125	.562	.750	1 .510	.625	2 .625	1 .625	50	8300	100
MTML-8	1/2-20-LH	.501	.937	.500	.625	1. 312	.500	2.438	1. 500	48	7100	80
MTM-8	1/2-20	.501	.937	.500	.625	1 .312	.500	2.438	1.500	48	7100	80
MTML-7	7/16-20 -LH	.4385	.812	.437	.562	1 .125	.437	2.125	1.375	46	5300	75
MTM-7	7/16-20	.4385	.812	.437	.562	1. 125	.437	2. 125	1. 375	46	5300	75
MTML-6-5	3/8-24-LH	.3135	.718	.406	.500	1 .010	.375	1.938	1. 250	50	4100	50
MTM-6-5	3/8-24	.3135	.718	.406	.500	1 .010	.375	1.938	1 250	50	4100	50
MTML-6	3/8-24-LH	.376	.718	.406	.500	1. 010	.375	1.938	1.250	46	4100	50
MTM-6	3/8-24	.376	.718	.406	.500	1. 010	.375	1.938	1.250	46	4100	50
MTML-5	5/16-24-LH	.3135	.624	.344	437	.875	.3125	1.875	1.250	50	2900	36
MTM-5	5/16-24	.3135	.624	.344	.437	.875	.3125	1.875	1.250	50	2900	36
MTML-4	1/4-28-LH	.251	.499	.281	.375	.750	.250	1 .562	1.000	50	1800	75
MTM4	1/4-28	.251	.499	.281	.375	.750	.250	1 .562	1.000	50	1800	75
MTML-3	10-32-LH	.190	.438	.250	.312	.625	.187	1. 250	.750	50	900	75
MTM-3	10-32	.190	.438	.250	.312	.625	.187	1 .250	.750	50	900	75
MTML-2	6-32- LH	.126	.312	.187	.250	.469	.138	.937	.500	50	450	75
MTM-2	6-32	.126	.312	.187	.250	.469	.138	.937	.500	50	450	75
Desc	Thread Class 2A	A ±.001	L ±.001	M ±.010	N ±.005	J ±.015	O Ret	XX ±.015	XY MIN	a° Mn	Min Radial Static Load(lb)	Breakaway Torque Oz-n

1). Material: Housing: Low Carbon Steel. Zin/Clear Plated,Thickness .0002"Minimum
Ball:52100 Steel. Rc 56 Min
Ball Finish: Hard Chrome Plated; Thickness: .001" Minimum.
Harchess 6 5-70 HRC after plating.
Copper has to be used as an undercoat for nickel
before Nicket l-Chromium plating.
Lner. Tolon*. Perma ne ntly bonded to housing.
2). Do not scale drawing.
3). Unless otherwise specified, all dims are in inches.
4). Breakaway torque for ball must be = specifed on the chart.
5). All platings (ball & housing) must with stand 96 hr of salt spray without a red rust.
6). The Ball end play to be .002" maximum.
7). The Ball h-out play to be .003" maximum
8).All dimensions apply after plating.


CTF:(race:Teflon)   (E.g:CTF3,CTFL3)

Desc.	Thread Class 2B	A +.0015 -.0005	B ±001	C ±030	G ±015	H +.062 -.031	M ±.010	N ±.005	J ±.010	? ±.030	P ±.015	a?   Min	Min Radwil Static   Load (tbs)	Breakaway Torque (oz-in )
CTF-3	10-32	.1900	.438	1.375	1.062	.562	.250	.312	.625	.406	.312	50	900	100
CTFL-3	10- 32-LH	.1900	.438	1.375	1.062	.562	.250	.312	.625	.406	.312	50	900	100
CTF-4	1/4-28	.2500	.509	1.687	1.312	.750	.281	.375	.750	.469	.375	50	1800	100
CTFL-4	1/4-28 -LH	.2500	.509	1.687	1.312	.750	.281	.375	.750	.469	.375	50	1800	100
CTF-4-A	1/4-28	.2500	.509	1.322	.947	.500	.281	.375	.750	.469	.375	50	1800	100
CTF-5	5/16-24	.3125	.616	1.813	1.375	.750	.344	.437	.875	.500	.437	50	2900	100
CTFL-5	5/16 -24-LH	.3125	.616	1.813	1.375	.750	.344	.437	.875	.500	.437	50	2900	100
CTF-6	3/8-24	.3750	.713	2.125	1.625	.937	.406	.500	1.000	.687	.562	44	4100	100
CTFL-6	3/8-24 - LH	.3750	.713	2.125	1.625	.937	.406	.500	1.000	.687	.562	44	4100	100
CTF-7	7/16-20	.4375	.812	2.375	1.812	1.062	.437	.562	1.125	.750	.625	46	5300	100
CTFL-7	7/16-20- LH	.4375	.812	2.375	1.812	1.062	.437	.562	1.125	.750	.625	46	5300	100
CTF-8	1/2-20	.5000	.931	2.781	2.125	1.187	.500	.625	1.312	.875	.750	48	7100	100
CTFL-8	1/2-20 - LH	.5000	.931	2.781	2.125	1.187	.500	.625	1.312	.875	.750	48	7100	100
CTF-10	5/8-18	.6250	1.125	3.250	2.500	1.500	.562	.750	1.500	1.000	.875	50	8300	100
CTFL-10	5/8-18 LH	.6250	1.125	3.250	2.500	1.500	.562	.750	1.500	1.000	.875	50	8300	100
CTF-12	3/4-16	.7500	1.312	3.750	2.875	1.562	.687	.875	1.750	1.125	1.000	46	12000	150
CTFL-12	3/4-16- LH	.7500	1.312	3.750	2.875	1.562	.687	.875	1.750	1.125	1.000	46	12000	150

                           a?=Cone Angle. B=Ball O.D: P=Width Across Flats
1). Material: Housing: Low Carbon Steel; Zinc/Clear Plated. Thickness: .0002* Minimum
Ball: 52100 Steel. Rc 56 Min
Ball Finish: Hard Chrome Plated; Thickness: .001" Minimum.
Harchess: 65-70 HRC after plating.
Copper has to be used as an undercoat for nickel
 before Nickel-Chromium plating.
Liner: Teflon",Permanently bonded to housing.
2). Do not scale drawing.
3). Unless otherwise speafied. all dims are in inches.
4). Breakaway torque for ball must be = specifed on the chart.
5). All platings (ball & housing) must with stand 96 hr of salt spray without a red rust.
6). The Ball end play to be .002" maximum.
7). The Ball in-out play to be .003* maximum.
8). All dimensions apply after plating.






Wuxi Jinwei Precision Machinery Co., Ltd
Mob: 0086-13906170913
Tel: 0086-510-83951313
Fax: 0086-510-83958913
Add: Yangshan Town, Huishan District, WuxiCity, Jiangsu Province
Email: sales@wxjinwei.com
Website: http://www.wxjwbearing.com