Hydraulic Stainless Steel Track,female,swivel Plain Bearing Rod Ends Bearing
-
Payment
-
Origin
China Mainland
-
Minimum Order
1
-
Packing
Pieces
- Contact Now Start Order
- Description
Product Detail
Applications of Hydraulic Stainless Steel Track,female,swivel Plain Bearing Rod Ends Bearing
1) Agriculture,
2) Light textile,
3) Mining,
4) Food &beverage,
5) Pharmaceutical,
6) Chemical processing,
7) Printing,
8) Dyeing, airport,
9) Air-conditioning,
10) Various kinds of conveying and rolling devices.
The vibration of rod end joint bearing is sensitive to the damage of rod end joint bearing, for instance peeling, indentation, rust, crack and wear will be reflected in the vibration measurement of rod end joint bearing; therefore, the size of vibration can be measured through the use of special rod end joint bearing vibration measuring apparatus (frequency analyzer, etc.), and abnormal situations can be deduced through frequency distribution. The measured values vary depending on different using conditions of rod end joint bearings or installation positions of sensors, and thus, the judgment standard needs to be determined after the measured value of each machine is analyzed and compared.
Product features:
1. Service: OEM welcome
2. Type: Rod End
3. Model Number: rod end bearing
4. Precision Rating: High precision
5. Certificate: ISO9001:2000
6. Meterial: Housing: Low Carbon Steel;Zinc Plated
7. Ball: 52100 Steel.Rc 56 Min.Hard Chrome Plated.
8. Race: Lntegral with machine housing.
Please note:
1. Do not scale drawing.
2. Unless otherwise specified, all dims are in inches.
3. Ball must move freely with fingers: no striction of movement.
4. Ball and Housing plating to withstand 96 hour salt spray test..
5. The Ball end play to be.002" maximum.
6. The Ball in-out play to be.003" maximum.
7. Color of plating Clear means White or Silver color.
8. Ball and Housing plating must with stand 96 hr of salt spry test without any visible red rust.
CM: (race: steel) (Cases: CM2, CML2)
MSM-12-14 | 3/4-16 | .552 | 1.312 | .687 | .875 | 1.755 | .750 | 2.875 | 1 750 | 46 | 13800 |
MSM-12-10 | 3/4-16 | .626 | 1 312 | .687 | .875 | 1.755 | .750 | 2.875 | 1.750 | 50 | 13800 |
MSM.12.1 | 3/4-16 | .757 | 1 312 | .687 | .875 | 1.755 | .750 | 2.875 | 1.750 | 46 | 13800 |
MSML-12 | 3/4-164.H | .751 | 1 312 | .687 | .875 | 1.755 | 750 | 2.875 | 1 750 | 46 | 13800 |
MSM12 | 3/4-16 | .751 | 1 312 | .687 | .875 | 1.755 | .750 | 2.875 | 1 750 | 46 | 13800 |
MSM-10-8 | 5/8-18 | .501 | 1.125 | .562 | .750 | 1.510 | .625 | 2.625 | 1 625 | 50 | 9600 |
MSML-10 | 5/8-18-LH | .626 | 1.125 | .562 | .750 | 1.510 | .625 | 2.625 | 1 625 | 50 | 9500 |
MSM-10 | 5/8-18 | .626 | 1.125 | .562 | .750 | 1.510 | .625 | 2.625 | 1 625 | 50 | 9500 |
MSML-8-6-ZC | 1/2-20-LH | .376 | .937 | .500 | .625 | 1.312 | .500 | 2.438 | 1 500 | 50 | 8000 |
MSM-8-6-ZC | 1/2-20 | .376 | .937 | .500 | .625 | 1.312 | .500 | 2.438 | 1 500 | 50 | 8000 |
MSML-8ZC | 1/2-20-LH | .501 | .937 | .500 | .625 | 1.312 | .500 | 2.438 | 1 500 | 48 | 8000 |
MSM-8ZC | 1/2-20 | .501 | .937 | .500 | .625 | 1.312 | .500 | 2.438 | 1.500 | 48 | 8000 |
MSML-8 | 1/2-20 LH | .501 | .937 | .500 | .625 | 1.312 | .500 | 2 438 | 1 500 | 48 | 8000 |
MSM-8 | 1/2-20 | .501 | .937 | .500 | .625 | 1.312 | .500 | 2.438 | 1 500 | 48 | 8000 |
MSM-7-6 | 7/16-20 | .376 | .812 | .437 | .562 | 1.125 | .437 | 2.125 | 1 375 | 50 | 6160 |
MSML-7 | 7/16-20-LH | .4385 | .812 | .437 | .562 | 1.125 | .437 | 2.125 | 1.375 | 46 | 6160 |
MSM-7 | 7/16-20 | .4385 | .812 | .437 | .562 | 1.125 | .437 | 2 125 | 1 375 | 46 | 6160 |
MSML-6ZC | 3/8-24-LH | .376 | .718 | .406 | .500 | 1.010 | .375 | 1.938 | 1.250 | 46 | 4900 |
MSML-6 | 3/8-24-LH | .376 | .718 | .406 | .500 | 1 010 | .375 | 1.938 | 1.250 | 46 | 4900 |
MSM-6ZC-1.801 | 3/8-24 | .376 | .718 | .406 | .500 | 1.010 | .375 | 2.489 | 1.790 | 46 | 4900 |
MSM-6ZC | 3/8-24 | .376 | .718 | .406 | .500 | 1.010 | .375 | 1.938 | 1.250 | 46 | 4900 |
MSM-6 | 3/8-24 | .376 | .718 | .406 | .500 | 1.010 | .375 | 1.938 | 1.250 | 46 | 4900 |
MSML-5ZC | 5/16-24-LH | .3135 | .624 | .344 | .437 | .875 | .3125 | 1.875 | 1.250 | 50 | 3470 |
MSML-5 | 5/16-24-LH | 3135 | .624 | .344 | .437 | .875 | 3125 | 1.875 | 1.250 | 50 | 3470 |
MSM-5ZC | 5/16-24 | .3135 | .624 | .344 | .437 | .875 | .3125 | 1.875 | 1.250 | 50 | 3470 |
MSM-5 | 5/16-24 | .3135 | .624 | .344 | .437 | .875 | .3125 | 1.875 | 1.250 | 50 | 3470 |
MSML-4 | 1/4-28-LH | .251 | .499 | .281 | .375 | .750 | .250 | 1.562 | 1.000 | 50 | 2150 |
MSM-4ZC | 1/4-28 | .251 | .499 | .281 | .375 | .750 | .250 | 1.562 | 1.000 | 50 | 2150 |
MSM4 | 1/4-28 | .251 | .499 | .281 | .375 | .750 | .250 | 1.562 | 1.000 | 50 | 2150 |
MSML-3 | 10-32-LH | .190 | .438 | .250 | .312 | .625 | .187 | 1.250 | .750 | 50 | 1170 |
MSM-3 | 10-32 | .190 | .438 | .250 | .312 | .625 | .187 | 1.250 | .750 | 50 | 1170 |
MSML-2 | 6-32-LH | .126 | .312 | .187 | .250 | .469 | .138 | .937 | .500 | 50 | 450 |
MSM-2 | 6-32 | .126 | .312 | .187 | .250 | .469 | .138 | .937 | .500 | 50 | 450 |
Desc | Thread | A±.001 | L±.001 | M±.010 | N±.005 | J±.015 | 0Rel. | XX±015 | XYMIN | a?Min | Min Radial |
CF (racesteel) (CF2, CFL2)
Dcsc | Housing Threod | A± | B±.001 | C±.060 | D±.045 | G±.030 | H±.060 | J±.018 | M±.010 | N±.005y. | O±.0550 | P±.030 | aMin | Min Radial |
MSF-2 | 6-32 | .1250 | .312 | 1.047 | .218 | .812 | .375 | .469 | .187 | .250 | .328 | .250 | 50 | 1000 |
MSFL-2 | 6-32 LH | .1250 | .312 | 1.047 | .218 | .812 | .375 | .469 | .187 | .250 | .328 | .250 | 50 | 1000 |
MSF-3 | 10-32 | .1900 | .438 | 1.375 | .218 | 1.062 | .562 | .625 | .250 | .312 | .406 | .312 | 50 | 2000 |
MSFL-3 | 10-32 LH | .1900 | .438 | 1.375 | .218 | 1.062 | .562 | .625 | .250 | .312 | .406 | .312 | 50 | 2000 |
MSF-4 | 1/4-28 | .250 | .509 | 1.687 | .218 | 1.312 | .750 | .750 | .281 | .375 | .469 | .375 | 50 | 3300 |
MSFL-4 | 1/4-28LH | .250 | .509 | 1.687 | .218 | 1.312 | .750 | .750 | .281 | .375 | .469 | .375 | 50 | 3300 |
MSf-4-3 | 10-32 | .250 | .509 | 1.687 | .218 | 1.312 | .750 | .750 | .281 | .375 | .469 | .375 | 50 | 3000 |
MSF-5-4 | 1/4-28 | .1885 | .509 | 1.687 | .218 | 1.312 | .750 | .750 | .281 | .375 | .469 | .375 | 50 | 3300 |
MSf-5 | 5/16-24 | .3125 | .616 | 1.813 | .218 | 1.375 | .750 | .875 | .344 | .437 | .500 | .437 | 50 | 4000 |
M8FL-5 | 5/16-24 LH | .3125 | .616 | 1.813 | .218 | 1.375 | .750 | .875 | .344 | .437 | .500 | .437 | 50 | 4000 |
MSF-5-4 | 1/4-28 | .3125 | .616 | 1.813 | .218 | 1.375 | .750 | .875 | .344 | .437 | .500 | .437 | 50 | 4000 |
MSF.6 | 3/8-24 | .37S | .713 | 2.125 | .218 | 1.625 | .937 | 1.090 | .406 | .500 | .687 | .562 | 46 | 6700 |
MSf-5-6 | 3/8-24 LH | .3125 | .713 | 2.125 | .216 | 1.625 | .937 | 1.090 | .406 | .500 | .687 | .562 | 46 | 6700 |
MSFL.6 | 3/8-24 LH | .375 | .713 | 2.125 | .216 | 1.625 | .937 | 1.090 | .406 | .500 | .687 | .562 | 46 | 6700 |
MSF-6-4 | 1/4-28 | .375 | .713 | 2.125 | .216 | 1.625 | .937 | 1.090 | .406 | .500 | .687 | .562 | 46 | 6700 |
MSf-6-5 | 5^16-24 | .375 | .713 | 2.125 | .218 | 1.625 | .937 | 1.090 | .406 | .500 | .687 | .562 | 46 | 5600 |
MSF-7 | 7/16-20 | .4375 | .812 | 2.375 | .312 | 1.812 | 1.062 | 1.125 | .437 | .562 | .750 | .625 | 46 | 6900 |
MSFL7 | 7/16-20 LH | .4375 | .812 | 2.375 | .312 | 1.812 | 1.062 | 1.125 | .437 | .562 | .750 | .625 | 46 | 6900 |
MSf-8 | 1/2-20 | .500 | .931 | 2.781 | .312 | 2.125 | 1.187 | 1.312 | .500 | .625 | .875 | .750 | 46 | 10000 |
MSFL-8 | 1/2-20 LH | .500 | .931 | 2.781 | .312 | 2.125 | 1.187 | 1.312 | .500 | .625 | .875 | .750 | 46 | 10000 |
MSF-10 | 5/8-18 | .625 | 1.125 | 3.250 | .312 | 2.500 | 1.500 | 1.500 | .562 | .750 | 1.000 | .875 | 46 | 11000 |
MSFL-10 | 5/8-18LH | .625 | 1 125 | 3.250 | .312 | 2.500 | 1.500 | 1.500 | .562 | .750 | 1.000 | .875 | 46 | 11000 |
MSP-10-8 | 1/2-20 | .625 | 1.125 | 3.250 | .312 | 2.500 | 1.500 | 1.500 | .562 | .750 | 1.000 | .875 | 46 | 10500 |
MSF-12 | 3/4-16 | .750 | 1.312 | 3.750 | .312 | 2.875 | 1.562 | 1.750 | .687 | .875 | 1.125 | 1.000 | 48 | 15000 |
MSfL-12 | 3/4-16 LH | .750 | 1.312 | 3.750 | .312 | 2.875 | 1.562 | 1.750 | .687 | .875 | 1.125 | 1.000 | 48 | 15000 |
MSF-12-10 | 5/8-18 | .750 | 1.312 | 3.750 | .312 | 2.875 | 1.562 | 1.750 | .687 | .875 | 1.125 | 1.000 | 48 | 13000 |
A - Bafl 1.0.; B - Ball Dia.; a-Minimum Cone Angle of
Wuxi Jinwei Precision Machinery Co., Ltd
Add:Yangshan Town,Huishan District,WuxiCity,Jiangsu Province
Contact: Weiming Cai
Mob: 0086-13906170913
Tel: 0086-510-83951313
Fax: 0086-510-83958913
Email: sales@wxjinwei.com
Website: http://www.wxjwbearing.com
- Hot Sell Good Quality Metal Turnbuckle Nylon Female Rod End 1 Pieces / (Min. Order)
- Bronze, Steel Miniature Metric Threaded Spherical Plain Bearings 1 Pieces / (Min. Order)
- Steel, Heavy Duty, Miniature Rose Joint, ball Bearing, rod End with High Precision 1 Pieces / (Min. Order)
- Stainless,Aluminum Clevis Threaded Plain End Rod Bearing 1 Pieces / (Min. Order)